It’s a good idea to perform routine checks of your garage door to keep it in top shape. It’s also important to have a professional handle any major repairs that are required. 

Minor damage is easy to fix, such as small dents or bends. A rubber mallet or a block of wood can often do the trick. Speak with Garage Door Repair Yukon for quality solutions.

A broken garage door spring can be a dangerous and expensive problem to deal with on your own. Unless you’re well-versed in how to handle high-tension springs, it’s best to leave the work to a professional garage door repair service to ensure it’s done correctly and safely.

One of the most common signs of a broken spring is uneven door movement. If one spring breaks while the other remains intact, the door may move faster on one side, which can damage the tracks and potentially injure someone using it.

Changing a broken spring is a difficult, time-consuming job that requires the proper tools and safety gear to complete it successfully. If you decide to tackle this project yourself, it’s essential to follow proper safety procedures, disable the garage door opener, and carefully monitor the entire process.

First, start by unwinding the existing springs to remove them from their mounting brackets. Make sure the bar is firmly inserted into the cones to avoid injury, and be prepared for the springs to snap loose or break as they’re being unwound. It’s also a good idea to clamp the garage door to the tracks so it doesn’t move during the spring replacement process.

When you’re ready to replace the new springs, it’s important to measure them accurately to ensure you get the right size and strength for your door. A quality garage door supplier will be able to recommend the correct springs for your door’s weight and size, and they can help you determine how much tension to apply when winding them up.

Finally, remember that while you’re working on the door, it’s a good idea to inspect other components for wear and tear, as well as any signs of rust. Rusty parts can deteriorate quickly, which can cause them to fail prematurely. It’s best to call a professional right away if you see any signs of rust or damage.

If you choose to hire a professional, they’ll not only replace your broken springs but also provide an inspection of the entire garage door system and address any other potential problems before they turn into major issues down the road. They’ll also give you a warranty on their work to provide peace of mind.

Damaged Panel

A garage door is a heavy, complex component that requires special skills and tools to install and repair. For this reason, it is not advised to try DIY garage door repairs or replacements, particularly for panels. It is best to leave these tasks to qualified, professional service providers, who have years of experience working with different types of garage doors and are trained in using tools safely and accurately. The proper tools and knowledge of how to measure and fit replacement panels correctly will ensure that the new panel is a perfect match for your existing garage door.

When it comes to repairing or replacing damaged garage door panels, the decision often depends on what caused the damage in the first place. Minor damage usually involves cosmetic issues such as scratches, dents, and small cracks that do not affect the function of your garage door. In these cases, repair is the more cost-effective solution.

More significant damage may result from a direct impact to the garage door panel itself, or it can be the result of a long period of exposure to harsh weather conditions that causes rusting, warping, and other structural damages. If you notice sagging or unevenness in your garage door panels, this is likely a sign of structural damage and should be addressed immediately by a qualified professional.

If your garage door panels are experiencing serious damage, it is likely that you will need to replace the entire garage door. Replacing the garage door is typically a more expensive solution than simply repairing one or more damaged panels, however it is an effective way to restore your garage door and protect its value and safety over time.

In addition to damage caused by accidents and everyday wear and tear, the age of your garage door can also play a role in whether or not it needs to be repaired or replaced. An expert service provider will be able to assess your garage door’s condition and recommend the best course of action for your specific situation. Contact your local Clopay dealer today to learn more about how to properly care for and maintain your garage door.

Damaged Weather Stripping

When the weather stripping around your garage door becomes damaged, it loses its ability to block out cold air and outside moisture. This means your home could be feeling a lot draftier than usual, especially during the winter. If left unattended, this could lead to expensive repairs down the road as well as sky-high electricity bills.

In order to prevent the damage to your garage door weather stripping from getting worse, it’s important to inspect it at least twice a year. It’s also recommended to use a silicone-based spray to protect it from the elements.

If you notice the weather stripping is sagging or missing a section, it’s probably time for a replacement. While you can patch small holes and tears with weather strip adhesive, it’s usually best to replace the entire seal to ensure that your garage remains warm and dry.

A common sign that your garage door weather stripping is failing is a cracking of the rubber material. This is caused by exposure to the elements and general wear and tear. If the cracking is severe, it may need to be replaced completely, depending on the condition of your garage door and frame.

Another common sign is a squeaky sound when closing the garage door. This is typically a result of the weather stripping becoming hard and brittle over time due to its exposure to sunlight. To prevent this, make sure to keep it oiled regularly and clean up any oily spots as soon as they arise.

A solid weather stripping is also essential for preventing water leaks and pests. If water seeps under the garage door, it can cause mold, rotting, and other damage to your property. It can even affect the performance of your garage door and opener.

To replace your garage door’s weather stripping, begin by removing any screws holding the old gasket in place. Next, carefully lower the garage door and examine the bottom edge for a tight seal. If you find that there are gaps, you’ll need to cut a new piece of weather stripping to size using a utility knife or hand saw. Once the proper length is cut, place it into the bracket sleeve and secure it in place using the original screws. Finally, lower the garage door again and inspect it for a good fit along the entire bottom edge of the panel.

Damaged Motor

Garage doors may seem like big, boring pieces of technology that don’t merit much attention. However, they play a variety of important roles and can suffer from some common issues that warrant prompt repairs to prevent further problems.

Motors are a primary source of garage door problems and are one of the primary reasons people call for professional help. Fortunately, there are some simple troubleshooting tips that can make these issues easier to diagnose and resolve.

If your garage door rises and falls erratically, stutters as it goes up or down, or moves unevenly, the problem is likely due to worn-out or damaged rollers or tracks. In this case, simply relocating or replacing the worn-out parts can remedy the issue.

Modern garage doors are equipped with safety sensors that are designed to detect obstructions and keep them from closing on objects or people. If these sensors become obstructed or fail to function properly, they can cause the door to reverse unnecessarily, endangering people and pets underneath. Luckily, these sensors are easy to inspect and test for, making them a crucial safety feature to maintain.

Faulty electrical wiring is another common problem that can impact a garage door’s functionality and even lead to a motor breakdown. Over time, electrical wiring can degrade due to age or rodent damage, and it’s critical that it be inspected regularly for signs of wear and tear.

If you suspect a problem with the motor, start by checking the power supply to the motor unit. Be sure that the remote control has fresh batteries, and that there are no tripped circuit breakers or blown fuses that could be impeding power transmission.

If everything checks out, the next step is to check for overheating in the motor itself. Excessive heat generated during operation is a common sign that the motor is experiencing some form of strain, and it’s essential to lubricate components regularly and ensure that the area surrounding the motor is well-ventilated.